• Increases accuracy of hits up to 80% on 100 m target;
• Improves flatness of shots;
• Enhances wear resistance and barrel endurance by 10 times;

•  

  Maximum killing power for the given type of ammunition;
• Reconditions and protects the barrel bore against wear;
• Restores geometry of the barrel bore (complete obturation).

Application:

The treatment consists of three steps. Use the gel of the appropriate colour for each step!

Step 1 (10 shots)

Use a rifle brush to apply red gel to the inner barrel surface.
Apply the gel to the bullet surface protruding out of the cartridge.
Fire once.

Repeat items 1 and 2 and fire again no less than nine times.
 

Step 2 (10 shots)

Treat the barrel bore and the bullet with the yellow gel and fire no less than ten times.

Step 3 (10 shots)

Apply green gel and fire no less than ten times.

Notes:
Treat new barrels with the green gel making 10 shots.
For preventive maintenance of restored barrels it is recommended to treat the barrels with the green gel making ten shots once a year or with the same gel making ten shots after every 1000 shots.